Home / IBP cables and transducer interfaces for inv
IBP cables and transducer interfaces for invasive pressure lines
Listed products79
InterfacesBD · Edwards · Utah…
Cable typesSingle + dual channel
Known references684102 · 2005772-001
Invasive blood pressure is a chain: disposable transducer at the patient, interface cable to the monitor's pressure module, and a calibration convention both ends agree on. The 79 products in this range are the middle of that chain — IBP adapter and interface cables that connect standard disposable transducer systems (BD, Edwards, Utah-style and others) to Philips, GE, Mindray and further monitor platforms, in single- and dual-channel versions.
Because transducers are usually already standardised inside a hospital, the reorder question is nearly always the cable: which transducer system on one end, which monitor input on the other. The catalogue is indexed by exactly those two ends, and known references run deep — the cross-reference carries, for example, the GE dual IBP adapter 2005772-001 and the long-running Utah/BD reference 684102.
Matching the two ends
Specify an IBP cable by its pair: transducer-side connector (the plug that mates with your disposable transducer's cable) and monitor-side connector (platform and module generation). Dual-channel cables serve two pressure lines into one input assembly and are stocked for the platforms that support them. If your transducer system is changing, tell us both the old and new systems — an interface change is often a cable-only change.
- Single- and dual-channel IBP adapter cables
- Interfaces for BD, Edwards, Utah-style and compatible transducer systems
- Platform ends for Philips, GE Healthcare, Mindray and more
Handling and replacement
IBP cables live in the wet zone of the bedspace: fluid ingress at connectors and crushed cable runs are the usual failure causes. Inspect connector pins and housing seals when a line reads damped or drifts after zeroing, and rule the cable in or out with a known-good swap before suspecting the transducer. Cables are reusable accessories; transducers themselves remain single-use devices sourced per hospital protocol.
Representative products from the current catalogue
| Product (official store listing) | Key specifications |
|---|---|
| 2005772-001 Compatible GE Healthcare Dual IBP Adapter Cable,1ft（0.3m） | GE Healthcare > Marquette: 2005772-001；Datex Ohmeda: E-PRESTN；Draeger: Narkomed 6400；Category: IBP；Monitor End Connector: Flat, 11-pin, dual-keyed GE connector；Cable Diameter: 5mm；Cable Material: PVC；Latex-free: Yes；Packaging Unit: 1；Weight |
| 2021196-001 IBP Cable GE Healthcare-Marquette Compatible for Abbott Transducer | AMC: CB-91020 (10 ft)；Abbott: 42772-36, 42772-04-36, 42773-36, 42773-04-36, 42661-36；Sage: B02-MX-40M；GE Healthcare > Marquette: 700075-001, 2021196-001, 2104158-001；Datex Ohmeda: E-PRESTN；Draeger: Narkomed 6400；GE Healthcare > Critikon > D |
| 2021197-001 GE Healthcare > Marquette Compatible IBP Adapter Cable | AMC: CB-91021E (10 ft)；Edwares: 896507021；GE Healthcare > Marquette: 2021197-001, 2021197-002 (1.2 meters), 2104162-001；Sage: B02-ED-40M；Datex Ohmeda: E-PRESTN；Draeger: Narkomed 6400；GE Healthcare > Critikon > Dinamap: Carescape PDM；Categor |
| 4pin B. Braun Connector with 3.6m | Draeger, For B.Braun Transducer, IBP, IBP Cables |
| AAMI 6Pin IBP Cable Compatible for Argon Transducer | AAMI: All；Bard Medical: H8000；Dixtal: DX 2020, DX 2021, DX 2023；Edan: iM8, iM80；Generra: 710C；Invivo: 3500, 3550, 4500 Plus, Escort 100, Escort 200, Escort 300, M12, Millennia, Omnitrak 4000；Ivy Biomedical: 400, 700；Mindray > Datascope: DPM |
| AAMI 6Pin IBP Cable Compatible for B.Braun Transducer | Mindray > Datascope: 115-020487-00；AAMI: All；Bard Medical: H8000；Dixtal: DX 2020, DX 2021, DX 2023；Edan: iM8, iM80；Generra: 710C；Invivo: 3500, 3550, 4500 Plus, Escort 100, Escort 200, Escort 300, M12, Millennia, Omnitrak 4000；Ivy Biomedical |
| AAMI 6PIN IBP CABLE Compatible for Edwards Transducer-0010-21-43094 | AMC: CB-91068E (10 ft)；Mindray > Datascope: 0010-21-43094；Edwards: 8000-0665, 896019021；AAMI: All；Bard Medical: H8000；Dixtal: DX 2020, DX 2021, DX 2023；Edan: iM8, iM80；Generra: 710C；Invivo: 3500, 3550, 4500 Plus, Escort 100, Escort 200, Esc |
| AAMI Compatible IBP Adapter Cable-42661-14 | AMC: CB-21101 (22 ft)；Abbott: 42661-14；Mindray > Datascope: 001C-30-70760；Smiths Medical >BCl: MX95114；Zoll: 8300-0788-01；AAMI: All；Bard Medical: H8000；Dixtal: DX 2020, DX 2021, DX 2023；Edan: iM8, iM80；Generra: 710C |
Questions & answers
Do you sell the disposable transducers themselves?
The range focuses on the reusable interface: adapter cables between standard disposable transducer systems and monitor inputs. Tell us your transducer system and monitor and we confirm the cable.
How do I identify the cable I need?
By the pair of ends: transducer-side connector type and monitor platform/model. An OEM part number (for example 2005772-001 for a GE dual adapter) settles it immediately.
Are dual-pressure cables available?
Yes — dual-channel IBP adapter cables are stocked for the platforms that support two invasive lines.
See also: IBP adapter cables · Part-number cross-reference · GE Healthcare accessories